EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller can be a highly effective solar controller made for off-grid solar programs. Based on multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and procedure stability for a wide range of photovoltaic (PV) apps.
Key Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller engineering for excellent photo voltaic Strength harvesting. Critical capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery everyday living.
LCD Display with real-time data monitoring.
Various Load Command Modes together with handbook and timer.
In depth Digital Protections from overcharging, about-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Be certain all factors are involved: Tracer AN device, temperature sensor, interaction cables, and person guide.
Confirm the model number and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry site near to the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Usually follow good protection protocols and make sure the technique is driven off before connecting factors.
Action 1: Connect the battery terminals into the cost controller (optimistic to positive, destructive to adverse).
Stage 2: Hook up the solar panel array to the PV enter terminals.
Phase 3: Hook up the load terminals if utilizing a direct load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Settings
Ability about the controller by connecting the battery very first.
Use the Liquid crystal display Show to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Manage.
five. Monitoring and Data Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port using software package for example Solar Station Personal computer.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Typical Difficulties
Concern one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Modify process parameters if Click Here required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification know-how ensures:
Increased Efficiency: Lowered Strength losses in the course of conversion.
Increased Reliability: Steady general performance beneath variable hundreds.
Longer Battery Daily life: Consistent and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is an Excellent option for optimizing solar power era and lengthening battery life. By subsequent the above mentioned set up manual, end users can be certain optimum effectiveness and process longevity.