EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Charge Controller is a remarkably productive photo voltaic controller suitable for off-grid photo voltaic methods. Based upon multiphase synchronous rectification technologies, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) applications.
Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller know-how for superior solar Strength harvesting. Important capabilities involve:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
State-of-the-art MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery life.
Liquid crystal display Display with genuine-time facts monitoring.
Various Load Command Modes such as manual and timer.
Detailed Electronic Protections in opposition to overcharging, over-discharging, shorter circuits, and reverse polarity.
Step-by-Action Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Ensure all factors are involved: Tracer AN device, temperature sensor, interaction cables, and person handbook.
Validate the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Cost Controller
Decide on a effectively-ventilated, dry area close to the battery lender.
Protected the Tracer AN controller using the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
three. Wiring the Photo voltaic Demand Controller
Warning: Generally adhere to correct safety protocols and make sure the technique is run off in advance of connecting parts.
Phase 1: Join the battery terminals to your cost controller (good to positive, detrimental to adverse).
Stage two: Hook up the solar panel array on the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Step four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Power about the controller by connecting the battery very first.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Information is often logged through the RS485 conversation port utilizing software for instance Solar Station Laptop.
Distant checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Troubles
Issue one: No Energy Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: Around-Voltage Safety
Confirm the photo voltaic array’s voltage ranking.
Alter system parameters if important.
Situation three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Great things about the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technology guarantees:
Better Efficiency: Lessened Electrical power losses for the duration of conversion.
Enhanced Dependability: Stable functionality below variable hundreds.
For a longer time Battery Everyday living: Steady and correct charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technology is undoubtedly an Excellent choice for optimizing solar power technology and extending battery lifestyle. By pursuing the above set up guideline, consumers Click Here can be certain optimum effectiveness and process longevity.